How To Install PC Suite For Android English Version

PC Suite has been released new version 1.6.1 on november yesterday. You must have a PC Suite to connect your PC to Android, iPhone, and Windows Mobile.  As long as you have PC Suite, massive resources are free to access.

Listen This Step by Step :
If your phone cannot be connected, please try the following operations:

1. If you are a GPhone or Sony Ericsson phone user, please go to “Settings->Applications->Development->USB Debugging” and check if the option is ticked. 
2. If you are an OPhone user, please select Debug mode or ADB mode when the phone is connected.
3. If you are a Lenovo OPhone user, please select ADB mode or Sync mode when the phone is connected.If your phone is connected over WIFI and if your phone has been rooted, the PhoneDaemon program will ask for the “Superuser Permissions” at first start, please allow it, then you can use all features of PC Suite, including Screenshot.

Bug Fixes:

1. Fixed the issue that some phones were stuck at “Initializing connection” and couldn’t been connected normally. 
2. Fixed the issue that resources couldn’t be downloaded normally.
3. Fixed the issue that under some circumstances, the phone’s recognition speed was too low.
4. Fixed the issue that under some circumstances, the interface of PC Suite had no response after the phone drivers were installed for the first time.

Android PC Suite v1.6.1.136 (Nov. 1, 2010)
 

New Features:

1. Officially added support for connection over WIFI. In WIFI mode, the following features are different from those in USB mode:

a)In WIFI mode, you need to complete related operations of Apps, Reinstall PhoneDaemon, Themes and Video on your phone.
b)One-key Transfer is temporarily unsupported in WIFI mode.
c)“Superuser Permissions” shall be acquired before using ScreenSnap, Full-screen ScreenSnap and PhoneDaemon.

    2.  In WIFI mode, your phone can be automatically connected.

    3.  A WIFI configuration interface has been added for PhoneDaemon, which supports:
 

a)Enable or disable “Allow WIFI Connection” to allow or not allow your phone to be connected to PC Suite over WIFI. Once the option is enabled, your battery consumption will be slightly increased.
b)Set PhoneDaemon password to prevent others to connect to your phone over WIFI.
c)Check your phone’s current IP address.
d)Disconnect your phone’s connection with a designated PC at anytime.

  4. Added the smart driver installation feature. Now once your phone is successfully recognized as an Android phone, PC Suite will smartly generate corresponding drivers and attempt to install the drivers for your phone.

  5. Added support for .npk apps. Now you can install .npk apps through Apps feature. Installing .npk apps can prevent your phone installing any unnecessary data packages contained in downloaded apps.

Feature Improvements:

1. Apps feature has been optimized for connection over WIFI. Now when you are installing or uninstalling apps in WIFI mode, related prompts will pop up to guide you to complete related operations on your phone. 
2. Video: improved display of online video pages. Now you can directly click a video link to download the video and then upload it to your phone directly.

Bug Fixes:

1. Video: fixed the repeated upload issue of videos. 
2. Photos: fixed the issue that on some phones, pictures couldn’t be normally shown under a corresponding photo category. 
3. One-key Transfer: fixed the issue that when One-key Transfer was being done between an Android phone and a WM phone, the transferring interface became blank and the transferring couldn’t proceed. 

Download PC Suite for Android

READ MORE .....

Make a Dual Boot Between Windows Mobile and Android

In this articles, i want to share about how to make a dual boot OS between Windows Mobile or Android at you startup your HTC HD2 Android Mobile. Now you can install dual boot of OS mobile for HTC HD2. HTC HD2 is so powerfull Smartphone. Many users have dual-booted their HD2 with Android, but selecting which OS the device boots into at startup can be a hassle. Courtesy of the developers at XDA-Developers, you can now choose at startup whether your phone boots into Android or Windows Mobile using a small program.

It's Simply Tutorial :

1. download the AndroidWindowsBoot.zip file from here 
2. Connect your phone to your computer via USB and transfer the CAB file anywhere on your device. To install Android Windows Boot, your phone must be booted into Windows Mobile.
3. On your phone, run ‘File Explorer’ from the start menu and navigate to the location where you saved the cab file. Simply tap on it to install, and you are done.
4. Now when you reboot your device, it will ask you at startup whether you want to boot into Android or Windows Mobile.
5. By default, the application will boot into Android after 5 seconds if the user does not make a choice within that time. Those who find this delay inconvenient can change it by editing the “\Program Files\Android Windows Boot\Delay.txt” file.

In case you do not have Android installed on your device, the option to boot into Android will be disabled, so you can even choose to install Android after installing this application.

Android Windows Boot has been tested to work on HTC HD2 but may work on other phones running Windows Mobile as well. It will NOT work on Windows Phone 7. via xda forum

READ MORE .....

How to Install Flash 10.1 On Sony Xperia X8

In this articles, i want to share you about how to install flash plugins version 10.1 on your Android 2.1 "Eclair" on Sony Ericsson Xperia X8. Why you need install flash player plugins on your android mobile, because of you need to browsing website with flash widget. Yes, many website still use flash for optimized. Lets, this is just follow these simple steps and you will be enjoying flash playback on your handset in no time.

• First, download ‘flash_for_2.1.zip’ from here.
• Now connect your phone to your computer via USB and copy the .apk file to your SD card’s root folder. Make sure that you don’t copy it to a sub-folder as it will not work that way.
• Next, install the ‘Apps Installer’ application, which can be found at the Android Market. Once it has been installed, launch it and follow its instructions to browse to the .apk file that you copied to your storage card.
• Install Flash...
• Once the installation is finished, reboot your phone, and you’re done.

Hore...!!!! Now you can start browsing flash websites on your Android phone.this tutorial from xda forum.

READ MORE .....

Modified Gmail.apk For Android to Showing Complete Image

In default of android applications Gmail.apk generally can not display the image in gmail messages. Maybe you feel disturbed over an inconvenience for those features. At this time, tips you can modif Gmail.apk application in order to display the image in your email. Anderdroid, Android developers and hackers at XDA Forums, has released a modded version of Gmail.apk for Android phones That allows you to completely download and view images Within an email.

The trick is as follows :

1. The first step is to download the modified Gmail.apk file from here and save it on your desktop.
2. Once done, connect your phone to the computer, mount SD and copy earlier downloaded APK file to SD card root.
3. Now launch Market on your phone and download Astro File Manager.
4. Once the download is complete, launch Astro File Manager and install the Gmail.apk file following onscreen instructions.
5. Once the installation is complete, exit file manager and tap on Gmail icon on home screen.
6. Now open any email with images to crosscheck if this really worked.

And there you go! You now have images visible within your email. In case you are facing any issues, please head over to official XDA thread for info and support.

READ MORE .....

Step by Step Full Backup and Restore Android Phone with Nandroid Backup

In this session, i will show you why so important backup your android phone. It's easy to backup your android. You need something will do something step by step to use Nandroid Backup.


Here are some benefits that can perform a full backup:

Benefit

* you can stop worrying about forgetting or unable to return specific components of your phone, such as text messages – everything android backs.

* You can try the new ROM, switch between them and the original share at any time by backing up and restoring the full image.

• You will be able to restore not only your physical phone, but also to other phones from the same model. Lost your handset and get a replacement? Not a problem – most recent restore your backup and it’s as good as you have been missing.
Here are a few things to keep in mind.

Things to Keep in Mind

* When you restore from a backup image is full, you must return all or nothing. In other words, you will not be able to return * only * the photos.

* A mandatory word of caution: there is always a small chance that something will not work. Android quite stable and well tested today but it is likely that you will not be able to recover, so copy the things you can not afford to lose a place before you start and make sure you’re OK with losing the rest in case something is wrong. Please note that your contact and listing application has been supported into the cloud by Google, so you do not need to return them separately.

Material

The steps above and backup / restore itself explained more detailed below.
 
Step 1. Root Your Phone

Rooting is a process of obtaining full access to all functions of your phone. Think of it as unlocking your phone and allow it to do whatever you want (except for flying – let’s not try that one).
We have a complete explanation of the most important benefits that come with your Android phone rooting here.
You need root to do full backups as unrooted phone will not only provide adequate access application to do so.
Because the roots of each different phone, the easiest way to find out the right way for your model and version of Google’s Android will only “root YOUR PHONE-YOUR-TEEN-android.”

Step 2. Install BackupN Nandroid

Nandroid is an application capable of making a complete picture of your phone and restore from their snapshots.

There are various ways to get Nandroid to your phone and here we will use the simplest of all approaches – using the applications manager ClockworkMod ROM also comes with a large number of other useful things. This can only be used on mobile devices is rooted, which is why the first step necessary.
This is the easiest part. HRM, in retrospect, everything described here is very easy, but installing applications from the Android Market – what could be easier?

1. Market access Android Market app loading.
2. Search for “ROM Manager.”
3. Install Manager ClockworkMod ROM.
And now you’re done with step 2. Did I mention this is the last step?

Back Up Your Phone

Now we can perform the actual backups.
Reserve itself will take approximately 50-10 minutes and will produce a new timestamped directory on the SD card. This directory will contain all the files needed for recovery – they include your full backup.
Here, I’ll give you a preview what a full backup be seen as:



One-time Setup

Now, before we can return to the top, we need to install a special Recovery Images for your phone. Do not worry – ROM Manager do it for you automatically by simply pressing a button.

Important: unplug the USB cable during this step, because some users have reported problems while mounted flashing recovery (thanks DennGir and others).

Picture recovery which contains a boot loader to replace your original boot loader. Boot loader gives you the ability to run backup and restore commands Nandroid outside the OS. It also allows you to install ROM but we will not do that today. Because the OS can not return itself to the brim while walking, Manager ROM will reboot into the boot loader to perform the operation Nandroid.
Restoration of images varies from one phone to another model, and ROM Manager automatically figures out where you need. Recovery of this image is not created by one person – there is a big community effort behind them, and Manager ROM only bring together in one package that is easy to use. Alright, just shout – let us go there.

Warning: The images flashing most likely void your warranty recovery

* Recovery ClockworkMod Flash Select.
* Confirm your phone model is detected.
* Hang on a minute to download.

Setup only once finished.
Read Completed Tutorials on Android Police 

this tutorials get from homeitinnovation.com

READ MORE .....

Auto Formating Android XML with Eclipse

Hello Android Lovers, In this article will explain the problem with the handling of Eclipse on the XML file format and the best way to fix it.

People using Eclipse for their Android development for several reasons:

    * it’s the only IDE fully supported by the Android dev team
    * it has a visual Layout/Resources builder that transforms XML files corresponding visual representations
    * it’s free and open source
    * I’ve been using Eclipse for many years and am very familiar with it

In order to use the visual features in Eclipse when developing for Android, you need to install the ADT plugin provided by Google

Problem

However, one thing about the Eclipse Android development has been disturbing for some time – and it is an XML format by visual tools. If you open the XML file in Eclipse and using this Layout / Resources tab (which serves both as a visual UI builder or a visual interface for resource management), Eclipse creates an XML representation of what you are building and sewage into the files you edit. The problem is that XML is not formatted in any way – Eclipse only write on one line, which looks really horrible and basically unusable.

For example, we have the XML file is formatted with beautiful Android sample menus. After using the Layout tab to add other items, ending with a single line unindented bad for it.
\

The Solution

Here’s how to solve this problem in a way that is almost completely automated, using formatting rules that can generate the most readable file. There is no need for external devices – Eclipse provides all the needs.

go to Window-> Preferences-> an XML-> XML File-> Editor

check out some of the “Split each attribute on a new line” and adjust the other options according to your wishes (such as Indent Indent using spaces and sizes)
press OK to save options
you have to do now is to press Ctrl-Shift-F or select Source-> Format
Let’s see what my XML is not to show above:

 Eclipse’s Auto Format feature is one of the best (yes, you can apply it to the Android Java code as well and nearly all other document formats).
Bonus – XML Cleanup
As an added bonus, the Eclipse also offers a choice of cleaning XML, which can do the following:
compress an empty element tag
insert required attributes
insert missing tags
Quote attribute values
source format (as above)
lines to convert to Windows, UNIX, or Mac
You can access the Cleanup option via Source-> Clean Up

Running Cleanup on we already pretty clean XML file turned the last into this:

The first option compressed the declaration to simply . Neat, isn’t it?

Final Words

+ Clean is good.
+ Uniform is good.
+ Use Ctrl-Shift-F and make it a habit.
+ Create a keyboard shortcut to the Cleanup function by going to Window->Preferences->General->Keys and use it instead of Ctrl-Shift-F (since it already formats as part of the Cleanup).
source: homeitinnovation.com

READ MORE .....

Google Open Source Code Android 2.2 Froyo

The programmers to develop applications for Android OS 2.2 supports Froyo. According to Andy Rubin, Google’s Vice President of Engineering, the institute has opened the source code can help developers create applications for Android.

OS version 2.2 is the latest operating system developed by Google. Froyo is none other than the Android version of the seven changes or upgrades which offer substantial. First, the increased performance and speed with the latest JIT compiler Dalvik in Android 2.2 produces between 2-5 times performance improvement compared to Android 2.1.

In addition, the Android version 2.2 also has additional business features, such as the Exchange account through the ability of auto-discovery and calendar sync. API management policy now also allows developers to create applications that can control the security features, such as remote wipe, password minimum, and lockscreen time out.

A number of mobile phone vendors like Motorola Android 2.2 has also adopted this on his cell phone. Recently, Motorola’s bringing back Droid X ith the support of Android version 2.2 (Froyo) certainly get keistimewan with the presence of the Adobe Flash Player latest version of 10.1.
ubergizmo

You can Open Source Code Android 2.2 Froyo in here

READ MORE .....

Download Android Application Directories

I have directory to free download many Application for your Android Mobile, I think that's popular website. Other, you can download other apps for Blackberry, iPhone, Windows Mobile, Symbian, and Java mobile.

To start your downloading visit www.in-apps.com

READ MORE .....

Protect Your Android Phone With Phone Halo

What happen is your lovely smartphone is lost ? I hope that not to happen...I have sollusion if you think your Android Phone is Important and Lovely.

Phone Halo is the complete solution to loss and misplacement of your belongings. A Phone Halo device is attached to your keys, purse, computer bag, etc.  An App runs on your phone.  When you leave either item behind, Phone Halo uses Bluetooth and GPS to help you find your item.

Phone Halo does 3 things to make sure you keep your stuff.

• Recovery, Phone Halo is integrated with GPS and Google maps to help you recover your lost items. When you lose an item, Phone Halo records where it was lost and sends a map to your email to where your phone or other items were lost. Phone Halo can also share this information with your friends, family, and social networks to help you recover your stuff.

• Locate, Do you find yourself searching for your stuff?  Phone Halo can help you find your phone or belongings by causing the item to ring..

• Protect, Phone Halo tracks your valuables using your phone.  Whenever you are about to leave your phone or other items behind, Phone Halo will alert you and lock your phone. The alert and lock settings can be personalized.

The Product Purchase for $59,95, i think that not to expensive...
For More Information and Buy it visit www.phonehalo.com

READ MORE .....

Popular Multiplayer Gaming Now Crossing Platform From iPhone to Android

Popular Multiplayer Game "Skies of Glory" Now Available on Android Platform. There is some interesting news for iPhone and Android gaming fans who were looking for multiplayer ability. Social Gaming Network has launched the first multi-platform game to let iPhone-to-Android gameplay over Wi-Fi, 3G and Bluetooth. The official press-release from Social Gaming Network.

From the feel of it, we can very well speculate that this cross-platform mobile gaming portability will soon be inducted by other Smartphone game developers. We can very well foresee that this technology will be much appreciated within the mobile gaming enthusiasts and fans.

You can download "Skies of Glory" for Android Mobile.

READ MORE .....

Download Android SDK Emulator Starter Package

Google Android SDK package allows developers to see all android features and let them use the whole interface. The Emulator to test drive Google Android without having to buy a phone. SDK now on Android 2.2 Update. If you are new to Android, download the SDK Starter Package. Later you can update with Android 2.2 ( Froyo ).

System and Software Requirements
To develop Android applications using the code and tools in the Android SDK, you need a suitable development computer and development environment, as described below.

Supported Operating Systems:

■　Windows XP or Vista
■　Mac OS X 10.4.8 or later (x86 only)
■　Linux (tested on Linux Ubuntu Dapper Drake)

Supported Development Environments:

■　Eclipse IDE
□　Eclipse 3.3 (Europa), 3.4 (Ganymede)
・　Eclipse JDT plugin (included in most Eclipse IDE packages)
・　WST (optional, but needed for the Android Editors feature; included in most Eclipse IDE packages)
□　 JDK 5 or JDK 6 (JRE alone is not sufficient)
□　Android Development Tools plugin (optional)
□　Not compatible with Gnu Compiler for Java (gcj)
■　Other development environments or IDEs
□　JDK 5 or JDK 6 (JRE alone is not sufficient)
□　Apache Ant 1.6.5 or later for Linux and Mac, 1.7 or later for Windows
□　Not compatible with Gnu Compiler for Java (gcj)

Get Android SDK Starter Package for Operating System :

• Windows OS : android emulator SDK
• Mac OS        : android emulator SDK
• Linux OS       : android emulator SDK

To install the package android emulator on your PC you can visit how to install.

READ MORE .....